RF / Network
Public Wi-Fi Hotspot Deployment and Signal Optimization
Designed and optimized a city-wide public Wi-Fi network providing seamless internet connectivity across major streets and public areas. The project focused on implementing Wi-Fi Mobility (Wi-Fi on the Go), enabling users to move throughout the coverage ar
Problem
The initial deployment strategy used 120° directional access points (APs) installed at fixed intervals of approximately 200 meters. This approach assumed that overlapping coverage areas would eliminate dead zones and provide continuous connectivity.
While the network was adequate for web browsing and video streaming, it failed to support real-time applications such as VoIP and video conferencing. Users experienced frequent roaming interruptions, signal fluctuations, and connection drops while moving between access points.
The primary issue was that the deployment was based solely on installation distance rather than actual radio frequency (RF) planning and environmental conditions.
Solution
A comprehensive RF optimization was carried out to redesign the wireless network based on the surrounding radio environment rather than fixed installation intervals.
The optimization included:
1. Selecting appropriate antenna beamwidths according to deployment scenarios:
1. 30°–60° directional antennas for narrow streets and corridors.
2. 90°–120° directional or omnidirectional antennas for wider roads and open public spaces.
2. Optimizing transmit power to minimize interference between neighboring access points.
3. Configuring consistent RSSI thresholds, SNR values, and coverage overlap to enable smooth client roaming.
4. Performing detailed Line-of-Sight (LoS) analysis and adjusting antenna alignment to maximize signal quality.
5. Optimizing operating channels and frequencies to reduce co-channel and adjacent-channel interference.
6. Fine-tuning access point placement based on real-world RF measurements instead of fixed spacing guidelines.
Result
The optimized deployment significantly improved network stability and roaming performance across the city. Users were able to move between access points with minimal interruption, enabling seamless use of real-time applications such as voice and video calls. The redesigned RF environment reduced dead zones, minimized interference, improved signal quality, and enhanced the overall user experience while maintaining reliable city-wide wireless coverage.